深圳市聚利兴仪器有限公司
咨询热线:+86-13751010017
网站公告: 聚利兴仪器所生产的试验仪器装置皆符合GB,IEC,UL等标准,试验精准,质量一流,是行业质检及技术研究部门的首选检测设备,详询:13751010017
地址:广东省深圳市宝安区西乡大道与宝安大道交汇处宝和大厦6F
电话:0755-33168386
传真:0755-61605199
联系人:李先生
邮箱:sales@china-mark.com
公司新闻 当前位置:首页 > 新闻动态 > 公司新闻

庆祝我司与ZUCCHETTI CENTRO SISTEMI SPA合作成功

文章作者:深圳市聚利兴仪器有限公司    时间:2015/5/30 16:10:11

5月6日,ZUCCHETTI CENTRO SISTEMI SPAL从我司订购IP4X IEC61032 TEST PROBED with 1N Thrust 一套,可见公司对测试设备的重视度。


Basic Introduction:

1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 AND UL

2. IP4X Test Probe D ( Test Probe D) is necessary appliance for household and similar electrical appliance of against electric shock protection test.

Technical parameters:

1. Test Probe Length: 100mm

2. Test Prober Diameter: 1.0mm

3. Dam- sphere Diameter: 35mm

4. Handle Diameter: 10mm

5. Handle Length: 100mm

6. According to IEC 61032 figure 4 (the Test probe D), Table 6 GB/T4208-2008 (the first characteristic digital 4/5/6)

Application:

1. Standard test refers to the joint part can't touch the live parts or close to the dangerous parts, 30mm circular baffle can not be enter.

2. In the test requirement for preventing access to the hazardous parts, Test Probe D need to be with thrust 1±0.1N

HTB1jvD9GpXXXXXKapXXq6xXFXXXM.jpg



         


【返回列表页】
联系人:李先生    手机:13751010017    QQ:320300123    旺旺:安规测试    Skype:carlisle.wyk
地址:深圳市宝安区西乡大道与宝安大道交汇处宝和大厦6F  -  粤ICP备15087065号-1
Copyright © 2010-2015 深圳市聚利兴仪器有限公司 All Rights Reserved 版权所有
聚利兴仪器