深圳市聚利兴仪器有限公司
咨询热线:+86-13751010017
网站公告: 聚利兴仪器所生产的试验仪器装置皆符合GB,IEC,UL等标准,试验精准,质量一流,是行业质检及技术研究部门的首选检测设备,详询:13751010017
地址:广东省深圳市宝安区西乡大道与宝安大道交汇处宝和大厦6F
电话:0755-33168386
传真:0755-61605199
联系人:李先生
邮箱:sales@china-mark.com
公司新闻 当前位置:首页 > 新闻动态 > 公司新闻

庆祝我司与GHADDAR Machinery Co. S.A.L合作成功

文章作者:深圳市聚利兴仪器有限公司    时间:2015/5/29 10:37:01

5月6日,GHADDAR Machinery Co. S.A.L从我司订购1.0 J Single Level Spring Impact Hammer * 1 set, 0.4-1.2N.m Preset Torque Screw Driver * 1 set,可见公司对测试设备的重视度。

1. IEC60068-2-75 Spring-operated Impact-test Apparatus

  1. Reference to IEC60068-2-75

  2. As Universal Type


1.Introduction:

(1) IEC60068-2-75 Spring Impact Hammer Test Apparatus is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.

(2)After applying the impact with the hammer, the products is examined with accessibility probes to determine

access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards.

2.Application:

Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place. If moved too fast, the clamp may skip its arrester and will lock at its way back when the pulling-force declines. Hold the device horizontally at it’s housing tube and press the (black) release cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached

Impact energy :1 J

Allowable error: ±10%

The weight of impact element: 250g±5g

The power: <10N

The whole weight: 1250g±10g

2. Sundoo SRT-1.2 0.4-1.2N.m Hand Held Preset Torque Screw Driver Tester Meter

Brief Introduction:

   SRT Torque Driver is applied in fasten pieces which have torque request, it can fasten the fastener according to pre-set torque driver. The products have bidirectional load, may pre-set the torque value, if surpasses the setting value, the driver will be idling, it can control the dynamics of thread effectively.

Product Trait:

1.General join head;
2.Bidirectional operation;
3.Preset torque value.

       

【返回列表页】
联系人:李先生    手机:13751010017    QQ:320300123    旺旺:安规测试    Skype:carlisle.wyk
地址:深圳市宝安区西乡大道与宝安大道交汇处宝和大厦6F  -  
Copyright © 2010-2015 深圳市聚利兴仪器有限公司 All Rights Reserved 版权所有
聚利兴仪器